Auram Hammer Mill

Auram Hammer Mill: The Perfect Solution for Dry Soil Preparation

Optimize earth preparation for compressed stabilized earth blocks (CSEB) and stabilized rammed earth (SRE) with the Auram Hammer Mill. Specifically designed for dry soils, it crushes and screens efficiently, ensuring uniform consistency while removing hard clay lumps and large rocks.

Important: Dry Soil Only

The Auram Hammer Mill is suitable for dry soil preparation only.

  • Wet or moist earth must be dried before crushing.
  • The earth must be free of roots.
  • Occasional stones up to 50 mm (2 inches) in diameter are permissible.

Why Choose the Auram Hammer Mill?

  • Efficient: Processes up to 8 m³ of soil per hour under optimal conditions.
  • Practical: Achieves 6 m³/hour depending on soil quality and loading speed.
  • Versatile: Works with manual shoveling or an optional in-feed conveyor for flexibility.
  • Cost-Effective: Affordable to run and maintain compared to heavy-duty rock crushers.

How It Works

  • Loading: Load soil manually using shovels or wheelbarrows, or use the optional in-feed conveyor for added convenience.
  • Crushing: Designed for dry soil, it handles occasional stones (up to 50 mm) for consistent results.
  • Unloading: Discharge the crushed soil directly onto the ground, into a wheelbarrow, or via an out-feed conveyor.

Capacity

  • Practical Capacity: 6 m³/hour depending on soil quality and loading speed.

The Auram Hammer Mill is the ultimate tool for preparing dry soil efficiently and reliably, reducing labor while boosting productivity. It’s ideal for both mechanized and manual construction sites, ensuring high-quality results every time.

Notes:

  • Electrical Power Requirements: The Hammer Mill and conveyor motors require three-phase 415 V, 50 Hz electrical power. If this specification is not compatible with your region, please contact Aureka to discuss alternative motor options.
  • Output Dependency: The output capacity of the Hammer Mill depends on the characteristics of the soil being crushed.
Electric motor 3 phase 415V, 3.7 kW
Output Max theoretical 8 m3/h Practical 4-6 m3/h
In feed conveyor Length 310cm Width 65cm Height 20cm
Out-feed conveyor Length 260cm Width35cm Height10cm
To make an order